OpenScad를 이용해 도장을 만들어 보려 합니다.
thingiverse를 검색해보니 아래 글이 있네요.. 딱 적당해 보입니다.
https://www.thingiverse.com/thing:48133
Customizeable Stamp by dsnettleton
Create a Stamp with any text you choose. Text automatically resizes to fill the space of the stamp's head.
www.thingiverse.com
OpenScad를 실행해보 보니까..
이런 에러가 뜨네요...
stamp.scad파일이 있는곳에
write라는 폴더를 만들고... Write.scad파일을 넣어주고..
write라는 폴더 아래 write라는 폴더를 하나 더 만들어서 폰트 파일을 넣어줘야 할 것 같습니다.
Write.scad 를 열심히 찾아보니..
아래 링크에서 폰트파일들과 Write.scad파일들을 다운받을 수 있네요...
https://www.thingiverse.com/thing:16193/files
Write.scad by HarlanDMii
UPDATED: 04/30/2014 Added bold= (be sure to download the latest version of write.scad to use this feature) bold=0 (not bold) bold=1(bolder by 10%) bold=2 (bolder by 20%) etc.. (fractions work too) Thanks MichaelAtOz for minkowski tip :) examples write("Hel
www.thingiverse.com
오늘 만든 도장 결과물...
오리지날 파일은 우측과 같이 손잡이가 너무 커서...
좀 바꿔가지고 출력했습니다.
stampx.scad라는 파일 열어보면.. 크기나 글씨 높낮이등 조절할 수있는 곳의 주석을 추가해 놓았습니다.
'3D' 카테고리의 다른 글
2021 황금 소상, 헬보이, 소녀상 (0) | 2021.01.01 |
---|---|
3D 프린터 PID제어에 대한 일반론.. (0) | 2020.08.27 |
3d 프린터 필라멘트 초간단 사용기 (0) | 2020.08.21 |
문씨티 무드등 (0) | 2020.07.16 |
OpenSCAD - 1장. 일반_데이타형_변수 (0) | 2020.07.13 |